Raise3D E2

The New E2 Precise, Reliable and Affordable

IDEX – Independent Dual Extruders

Mirror Mode
Print symmetrical 3D models simultaneously. Greatly increase productivity.

Duplication Mode
Use both extruders in synchronized printing. Doubles production capabilities.

Automatic Bed Leveling

• High precision mechanical probe for automatic flatness detection
• Reduces the need for rafts
• Ensures solid foundations

Assisted X/Y Offset Calibration

• Easy to use step-by-step video guide
• Enhances higher accuracy
• Saves time and lowers cost

Large Build Volume

• Up to 330 x 240 240 mm
• Large build volume for bigger prints
• More options for designs

Power Save mode

• Turns off the RaiseTouch and LED lights
• Saves energy while printing through the night

Safety Mode

• Detects whenever a door is opened and pauses the print
• Prevents damage to printing models

Flexible Build Plate

• Flexible build plate with BuildTak
• Easily remove prints
• Proven durability over 5,000 prints

Motion Board

• Designed to maximize advantages of IDEX technology
• Driven by Reprap firmware, and Duet electronics with Raise3D enhancements

Compatible with a Variety of Filaments up to 300℃

PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / Glass Fiber Enforced / Carbon Fiber Enforces / Metal Particles Filled / Wood Filled

Intuitive User Experience
Visual Interface / Rapid Reviewing / Visual Print Progress / Full Adjustment Control

• 7-inch touch screen
• Integrated setting control
• On screen assistance
• Visual model selection

Never Lose a Print

• Second Generation Power Loss Resuming
• New Extruder wtih Filament Run-out Sensor

“I actually knocked off the power accidentally. I was currently doing a 96 hours print with only 2 hours left. As I raised my head to scream in terror, I turned the machine back on and it asked me to continue print. THIS WAS A LIFESAVER！” – Shon Robinson

HEPA Air Filtration

• Enviromentally friendly
• Designed to silently remove nano-particles

 

General
Build Volume (W×D×H)	Single Extruder Print: 13×9.4×9.4 inch / 330×240×240 mm Dual Extruder Print: 11.6×9.4×9.4 inch / 295×240×240 mm
Machine Size (W×D×H)	23.9×23.5×18.3 inch / 607×596×465 mm
Print Technology	FFF
Motion System	Independent Dual Extruders
Filament Diameter	1.75 mm
XYZ Step Size	0.78125, 0.78125, 0.078125 micron
Print Head Travel Speed	30 – 150 mm/s
Build Plate	Flexible Steel Plate with Buildtak
Max Build Plate Temperature	110 ºC
Heated Bed Material	Silicone
Build Plate Leveling	Mesh-leveling with Flatness Detection
Supported Materials	PLA / ABS / HIPS / PC / TPU / TPE / NYLON / PETG / ASA / PP / PVA / Glass Fiber Infused / Carbon Fiber / Infused / Metal Fill / Wood Fill
Nozzle Diameter	0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available)
Max Nozzle Temperature	300 ºC
Connectivity	Wi-Fi, LAN, USB port, Live camera
Noise emission (Acoustic)	＜50 dB(A) when building
Operating Ambient Temperature	15-30 ºC, 10-90% RH non-condensing
Storage Temperature	-25℃ to +55℃, 10-90% RH non-condensing
Technical Certifications	CB, CE, FCC, RoHS
Filter	HEPA filter with activated charcoal
Electrical
Power Supply Input	100-240 V AC, 50/60 Hz 230 V @2 A
Power Supply Output	24V DC, 350 W
Software
Slicing Software	ｉdeaMaker
Supported File Types	STL, OBJ, 3MF
Supported OS	WINDOWS/ macOS/ LINUX
Machine Code Type	GCODE
Printer Controller
User Interface	7-inch Touch Screen
Network	Wi-Fi, Ethernet
Resume Print after Power Outage	Firmware recording, no need for battery installation. Protection from any condition.
Screen Resolution	1024*600
Motion Controller	ARM Cortex M7.400MHZ FPU
Logic Controller	NXP ARM Cortex-A9 Quad 1 GHz1GB
Memory	1GB
Onboard Flash	8GB
OS	Embedded Linux
Ports	USB 2.0*2, Ethernet*1

Vægt	42,7 kg
Build Volume	295 × 240 × 240 mm, 330 × 240 × 240 mm
Producent	Raise3D
Extruders	2
Filament Diameter	1.75 mm
Anbefalede Print hastighed	30 – 150 mm/s
Type	FDM Printer