Spectrum Filaments – Nylon – 1.75mm – Natural – 0.5 kg
360,00 kr. incl. moms
På lager, bestil og vi sender i morgen
Fragt fra 49,- fri fragt ved køb over 500,-
Beskrivelse
Ifølge Spectrum Filaments motto, “even the best 3D printer means nothing without a good filament”.
Polyamide PA6 (Nylon) is an extremely durable, technical material. Parts printed from Nylon have not only a high resistance to abrasion, but also a high temperature resistance. In addition, polyamide PA6 is characterized by good insulating properties, chemical resistance to greases, oils and high mechanical strength. The above features make it applicable to print functional parts, including slide bearings, gearwheels or guideways. Nylon PA6 filament is very sensitive to moisture. In order to obtain the best performance of the printed object, it is recommended to dry the material carefully before printing. Spectrum Filaments PA6 as one of the few is also characterized by very low shrinkage of approx. 0.3%.
Nylon PA6 fordele:
- Meget lav forarbejdnings krympning 0,3%
- Høj temperatur resistens
- Nem adskillelse af objektet fra bedden
- Resistens mod slid
- Bred vifte af applikationer
- Kemisk modstandsdygtighed over for fedtstoffer og olier
- Høj mekanisk styrke
- Meget stærk laminering af lag
Filamentet er oprullet på en pæn & gennemsigtige spole.
Spectrum Filaments er produceret i Europa.
Yderligere information
| Vægt | 0,4 kg |
|---|---|
| Farve | Natural |
| Millimeter | 1.75mm |
| Type | Nylon |
| Brand | Spectrum Filaments |
| Vægt | 0,5 kg |
| Diameter Tolerance | ± 0.05mm |
| Anbefalede Print Temperatur | 250-270°C |
| Anbefalede Heated Bed Temperatur | 85-100°C |
| Indpakning dimension | 21cm x 20.5cm x 8.6cm |
| Spool dimensions | External diameter – 20cm, internal diameter – 5,2cm, width 5,2cm |
Relaterede varer
