Bambu Lab A1

Bambu Lab A1

Bambu Lab A1 printer is a cutting-edge technology that revolutionizes the field of 3D printing. Powered by the latest advancements in additive manufacturing, this printer sets new standards in precision, speed, and versatility. With its sleek design and user-friendly interface, Bambu Lab A1 seamlessly integrates into any professional workspace or personal creative studio.

Active Flow Rate Compensation

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Quick Swap Nozzle

All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.

Active Motor Noise Cancelling

The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger, with CoreXY Speed And Quality

Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

What’s in the box

 

 

Construction an Technical Details
Usable Filament Diameter	1.75 mm
Max Nozzle Temperature	300 ºC
Open Filament System	Yes
Extruder Type	Direct drive
Recommended Printing Speed Max	500 mm/s (
Build Area	256 mm x 256 mm x 256 mm
Build Plate Temp Max	100 ºC
Build Plate Surface	PEI sheet
Build Plate Attachment	magnetic
Build Chamber During Process	Open
Build Chamber Heated	No
Filament Chamber Closed	No
Extruder Number Of	1
Installation Space / Requirements
Total Mass Overall Dimensions	385 mm x 410 mm x 430 mm
Total Weight	8 kg
Max Power Consumption	1300 W
Voltage	AC: 100 V240 V (50-60 Hz)
Equipment
Emergency Shutdown	No
Hepa Filter	No
Door Sensor	No
Door Lock During Print	No
Filament Runout Sensor	Yes
Filament Clogging Sensor	Yes
Power Loss Fail Safe	Yes
Touch Screen	Yes
Camera	Yes
Connection
SD Card	No
USB Port	No
Ethernet Port	No
WLAN	Yes
Accuracy
Shipping
Shipping Box	552 mm x 532 mm x 320 mm
Shipping Weight	11.7 kg

Vægt	11,7 kg
Extruders	1
Build Volume	256 x 256 x 256 mm
Producent	Bambu Lab
Type	FDM Printer